IRC Egg Drop

Docs that have proven to be a staple in understanding computer/network security. This is not an inclusive forum and nothing ipublished will tell you how to 0wn someone, these docs will help you understand how you got 0wnd.

IRC Egg Drop

Postby weazy » Fri May 30, 2003 7:21 pm

[===================================================================================]
[ The EggDrop IRC Bot / Written by The Cyber God (e-mail: talrun@actcom.co.il) ]
[ Version 1.0 / My ICQ#: 7864557 ]
[===================================================================================]

--[ Editor Notes ]--
Please send comments, questions and feedback to talrun@actcom.co.il
This tutorial has been written by a member of Black Sun Research Facility.
Visit us at blacksun.box.sk.

--[ Table Of Contents ]--
What is EggDrop?
What do I need to run an EggDrop bot?
Where can I get it?
How do I set up the bot?
Basic commands
Users stuff
Channels stuff
Linking up bots
What is the TCL and what does it have to do with EggDrop?
Tips and Tricks
Bibliography

--[ What is EggDrop? ]--

Note: This is taken from the readme file of EggDrop 1.3.28

Eggdrop is an IRC bot, written in C. If you don't know what IRC is,
this is probably not whatever you're looking for! Eggdrop, being a
bot, sits on a channel and takes protective measures: to keep the
channel from being taken over (in the few ways that anything CAN),
to recognize banished users or sites and reject them, to recognize
privileged users and let them gain ops, etc.

One of the more unique features of eggdrop is its "partyline",
accessible via DCC chat, which allows you to talk to other people
lag-free. Consider it a multi-way DCC chat, or a miniature IRC
(complete with channels). You can link up with other bots and
expand the partyline until it actually becomes something very much
like IRC, in fact.

--[ What do I need to run an EggDrop bot? ]--

To get eggdrop running you need a few things:
* Some sort of a Unix account (whether you have local access or whether it's a remote shell account, as long as it let's you run Eggdrop and keep running processes after you log out)
* Pretty good knowledge of IRC and Unix, including what DCC chat is.
* About 500k of disk space, or more, depending on your system (on
Linux, the executable takes up about 400k currently -- it will
be a lot larger on a RISC system)
* The TCL libraries (lib files), which can be found at http://www.linuxberg.com

If you want your bot to be 24/7 (24 hours a day, 7 days in a week) you need a shell account on a computer with a 24/7 Internet connection (unless you yourself have such a computer... in which case, you must give me an unrestricted shell account before you proceed reading this document... kidding :-) ). You can get such shells by either buying them or kissing up to the admin and making him give you one for free (none of those "free shell account providers" will let you run an Eggdrop bot, because they kill all of your processes, including the bot, once you log out). There are lots of good shell providers out there. I personally recommand http://www.foonet.net.

Now to the TCL part:

Before you can compile eggdrop, you need to have TCL installed on
your system. Most systems should already have TCL on them by now
-- you can check by trying the command "tclsh". If it works, you will be
given a "%" prompt, and you can type "exit" to exit the program.
This means your system has TCL installed. If tclsh doesn't work, it
probably means that you don't have TCL, and you will need to download
and install it. The best FTP site to download TCL from is:
ftp://ftp.scriptics.com/pub/tcl

The best version at the moment this paper has been written is 8.0.4
(as recommended by dw@Undernet). Versions such as 7.6p2 are still
good enough to use though.

Note: I won't explain how to download files from FTP sites on this tutorial,
nor how to install the TCL library. There are enough tutorials and documents
on this subject already.

If you bought a shell and you know they allow running IRC bots from it (such an important piece of information should be written somewhere on the shell provider's website), you can be completely sure that they already got the TCL library.

Before you begin, ask yourself if you really need a bot. Most IRC
servers allow only a handful of bots -- some forbid them outright.
The reason? Too many people run bots as "toys" or as a means of
destruction. If you want to use eggdrop for destructive purposes,
go ahead and erase this directory now. It's almost impossible to
do what you want with this bot.

You should try to find at least one server that will allow you to
run a bot. If you use an ISP (Internet Service Provider) that runs
its own IRC server, check to make sure that bots are okay. If you're
going to use a server somewhere else, read the MOTD (Message Of The
Day) and find out what their bot policy is. Following the rules will
go a long way toward making your bot accepted.

Generally speaking, you only need a bot on EFnet if your channel has
a constant supply of users (24 hours a day) and no bot. If your
channel already has a couple of bots on it, it probably doesn't need
any more. More bots don't do any more good, and just waste bandwidth.
On the Undernet you will probably never need more than one bot per
channel. Also note that it's generally not acceptable to use a bot
to "keep a channel open" when it's not in use. However, policies
differ from net to net and server to server so check around before
starting. You need multiple bots if you got an extremely large channel.

Bots CANNOT provide absolute protection. Nothing can. Eggdrop will
try its hardest but there are no guarantees.

--[ Where can I get it? ]--

Eggdrop can be downloaded from various sites across the world. Here are some:
The official eggdrop FTP site: ftp.eggheads.org.
Current mirrors are:
ftp.de.eggheads.org
ftp.fr.eggheads.org
I also recommand the site ftp.apolloweb.net (Dir: /pub/files/) since it is extremely fast. (Sometimes when you download Eggdrop FROM a shell using this site you can reach 100K-170K per second, because shell accounts normally have quite a fast connection)

Also, there are 3 major versions of EggDrop: 1.1.5, 1.3.X, 2.0
First of all, 2.00 SUCKS. It lacks some help/text files, it's compilation can be hard and it got almost no different from 1.3.X
EggDrop 1.1.5 claims to be the most stable one, but most of the TCL scripts (See below) are coded for 1.3.X, hence I recommand using 1.3.X. All the information in this tutorial from now on will regard EggDrop1.3.X.

--[ How do I set up the bot? ]--

Ok...
First of all, login to your shell and download EggDrop using FTP. (You can also upload it using FTP but downloading it through the shell is usually much faster)

Now type these commands:

gunzip eggdrop1.3.27.tar.gz
tar xf eggdrop1.3.27.tar
cd eggdrop1.3.27
./configure

Ok
eggdrop1.3.27 refers to the bot filename. It depends on the site and the eggdrop version you downloaded. It can also be, for example, eggdrop1.3.23.tgz. Then you'll need to type:

gunzip eggdrop1.3.23.tgz
tar xf eggdrop1.3.23.tar
cd eggdrop1.3.23
./configure

After you type the ./configure you will need to wait. This will check whether you can run EggDrop on this system or not. If it finishes with no error you need to type

make

This will build the EggDrop package. If this is done with NO errors (E.G. it gets to the linking part) you can now start building the config file. The config file is a set of lines that defines what will be the bot nick, server and so on...

Here is an example of an easy-to-use config file. You need to copy everything from '### Start ###' to '### End ###' into a file and then upload it to the shell with a name like bot.conf or eggie.conf or whatever you like :-)

#######################
### Start ###
#######################
### Edit from here: ###
#######################

# Bot's IDENT
set username "Bot"
# Bot's Owner(s)/Master(s)
set admin "^TCG^"
# Bot's IRC network
set network "EFNet"
# The telnet port that the bot will open for incoming connections
listen 2000 all
# Bot's Owner(s)/Master(s)
set owner "^TCG^"
# Bot's NickName
set nick "Bot"
# Bot's Alternative nickname
set altnick "-Bot"
# Bot's Real Name
set realname "Eggdrop Bot"
# The bot static channel. you can only specify 1 channel here.
set confchan "#Bots"
# The bot IRC servers
set servers {
irc.freei.net
}

##################################################################
##################################################################
###### !!! You don't need to change anything from here !!! #######
##################################################################
##################################################################

set timezone "EST"
set max-logs 5
set log-time 1
set keep-all-logs 0
set console "mkcobxs"
logfile mkco * "$nick.log"
set userfile "$nick.user"
set sort-users 0
set help-path "help/"
set temp-path "/tmp/"
set motd "motd"
set protect-telnet 0
set dcc-sanitycheck 0
set ident-timeout 30
set require-p 1
set open-telnets 0
set connect-timeout 15
set dcc-flood-thr 3
set telnet-flood 5:5
set resolve-timeout 15
set ignore-time 15
set debug-output 0
set hourly-updates 00
set notify-newusers "HQ"
set default-flags "fv"
set whois-fields "url"
set remote-boots 2
set share-unlinks 1
set die-on-sighup 0
set die-on-sigterm 0
#unbind dcc n tcl *dcc:tcl
#unbind dcc n set *dcc:set
unbind dcc n simul *dcc:simul
set max-dcc 50
set enable-simul 1
set allow-dk-cmds 1
set mod-path "./"
loadmodule channels
set chanfile "$nick.chan"
set ban-time 10
channel add $confchan {
chanmode "+nt"
idle-kick 0
flood-chan 4:6
}
channel set $confchan -clearbans -enforcebans +dynamicbans +userbans -autoop -bitch -greet +protectops -statuslog -stopnethack -revenge +autovoice -secret -shared -cycle
set share-greet 0
set use-info 1
loadmodule server
set keep-nick 1
set strict-host 0
set quiet-reject 1
set lowercase-ctcp 0
set answer-ctcp 3
set flood-msg 5:5
set flood-ctcp 3:5
set never-give-up 1
set strict-servernames 0
set default-port 6667
set server-cycle-wait 60
set server-timeout 15
set servlimit 0
set check-stoned 1
set use-console-r 0
set serverror-quit 1
set max-queue-msg 300
set trigger-on-ignore 0
set use-silence 0
set handle-mode_r 0
loadmodule ctcp
loadmodule irc
set bounce-bans 0
set allow_desync 1
set kick-method 1
set kick-bogus 1
set learn-users 1
set wait-split 300
set wait-info 180
set modes-per-line 3
set mode-buf-length 200
set use-354 0
#unbind msg - ident *msg:ident
set no-chanrec-info 0
loadmodule transfer
set max-dloads 3
set dcc-block 0
set copy-to-tmp 1
set xfer-timeout 300
loadmodule share
set resync-time 900
#set private-owner 0
#set private-global 0
#set private-globals "mnot"
#set private-user 0

#loadmodule filesys
set files-path "/home/mydir/filesys"
set incoming-path "/home/mydir/filesys/incoming"
set upload-to-pwd 0
set filedb-path ""
set max-file-users 20
set max-filesize 1024
loadmodule notes
set max-notes 50
set note-life 60
set allow-fwd 0
set notify-users 1
set console-autosave 1
set force-channel 0
set info-party 0
loadmodule seen
checkmodule blowfish
#loadmodule assoc
source scripts/alltools.tcl
source scripts/action.fix.tcl
source scripts/userinfo1.0.tcl
loadhelp userinfo.help

#######################
### End ###
#######################

OK!
After editing the first lines of the file, you can upload it to the shell. The file MUST be in the bot's directory (E.G. ./eggdrop1.3.27/)
Now you need to run it. Since this is the first time you run it you need to type in the bot's directory:

./eggdrop -m bot.conf

while bot.conf is your config filename.

Note: Next time you will run the bot (if it goes down, for example) you don't need the '-m'

Now start an IRC client to connect to the bot's server, join it's channel and wait for it to come in. When you see the bot message it with 'hello'(/msg BotNick hello. You need to replace the word BotNick with the bot's nickname). Then it will tell you to set a password. You do that by messaging it with 'pass password' (/msg BotNick pass mypassword). Replace the word mypassword with your password, whatever it is (for example: if your password is IRC, you need to do /msg BotNick pass IRC)

--[ Basic commands ]--

Most commands are sent to the bot via DCC chat. First of all you need to DCC CHAT with the bot, then enter your password and now you will be able to start sending it some commands.
After you DCC it, you can start sending in commands. All the commands on the DCC chat are started with a '.' (dot).
Note I: Some commands requires diffrent access levels. I will explain about them later.
Note II: If you will get some "Unknown command" message it probably means that your access level is simply too low.

A parameter in a <> is not an option, and in a [] is an option.
.help [command] - Shows you the help screen. Example: .help help
.bots - Will display a list of connected bots. (Eggdrop can be connected to other bots. This will also be discussed later)
.status - Will display some status stuff about the bot.
.whois <handle> - Will give you info about <handle>. Example: .whois ^TCG^
.jump <server> - Will connect the bot to a specific server. Example: .jump irc.israel.net
.+user <handle> <hostmask> - Will add a user to the bot. Example: .+user ^TCG^ ^TCG^!talrun@*.il
.-user <handle> - Will remove a user from the bot. Example: .-user ^TCG^
.+host <handle> <hostmask> - Will add <hostmask> to <handle>. Example: .+host ^TCG^ *!*@*.israel.net
.-host <handle> <hostmask> - Will remove <hostmask> to <handle>. Example: .-host ^TCG^ *!*@*.israel.net
.+chan <#Channel> - Will make the bot join <#Channel>. Example: .+chan #Israel
.-chan <#Channel> - Will make the bot part <#Channel>. Example: .-chan #Israel
.chanset <#Channel> <Setting> [Value] - Will set a specific attribute of the channel (See later). Example: .chanset #Israel +autoop or Example 2: .chanset #Israel flood-chan 5:60
.chattr <handle> <flags> [Channel] - Will give <handle> the global flags <flags> or [Channel] flags. Example: .chattr ^TCG^ +o Example 2: .chattr ^TCG^ +f #Israel
.die [Reason] - Will kill the bot
.save - Will make the bot save it's database (This is also done automatically)
.rehash - Will force the bot to reload it's config file
.reload - Will cause the bot to reload it's channel file
.restart - Will restart the bot
.+bot <bot> <host:port> - Will add a bot to the bot's database for creating a botnet (See later). Example: .+bot Eggie the-shell.com:4556
.-bot <bot> Will remove <bot> from the database
.botattr <bot> <flags> - Just like .chattr but for bots
.link <bot> - Will cause your bot to link <bot>
.unlink <bot> - Will force the bot to break the link with <bot>
.chpass [nick] <pass> - Will change your pass or [nick]'s pass if you got access to change other users passwords.
.nick <newnick> - Change your nick on the partyline. (See below)
.op <nickname> <channel> - Will OP <nickname> at <channel>. Example: .op ^TCG^ #Israel
.voice <nickname> <channel> - Will VOICE <nickname> at <channel>. Example: .voice ^TCG^ #Israel

This is all for now.... More commands in the next chapters (or in the EggDrop documentations, whichever you choose to read)
Another nice feature Eggdrop has is partyline.
It allows multiple users to DCC chat with the bot and create a small IRC network.
To say something, all you need to do is to just type it in and press enter.
If it doesn't start with a '.' (dot) it will be said in the partyline and all the other bot users will see it.

--[ Users stuff ]--

Sometimes you want to add users to your bot so they'll have access to it.
Here I will describe how to add users and how to setup they`re access.

To add a user:
.+user <handle> <hostmask>

<handle> is the user name of the user. It's just like the user's nickname but it is limited to 9 letters.
<hostmask> is the host that the user will use so the bot will recognize it. You can always add and remove hostmasks using the .+host and the .-host in the partyline.

After it you need to set the user's global access. To do that you type .chattr <handle> <flags>
<handle> is the handle that you wrote in the .+user and <flags> are the user flags. They will set it's access. Here is a list of them.

o global op (bot will op this user on any channel)
m master (user is a bot master)
n owner (user is the bot owner)
t botnet master (user is a botnet master)
x xfer (user has file-area access)
j janitor (user is a file-area master)
p party-line (user has party-line access)
c common (user record is a common-access site) [see 'help common']
u unshared (not sent to other share-bots)
b bot (user is another bot)
d global deop (user cannot get ops)
k global auto-kick (user kick & banned automatically)
f global friend
v global voice (user get +v automatically on +autovoice channels)
a global auto-op (always op this user on join)
h high-light flag, user sees highlighting in text output
(plus 26 user-defined flags, A-Z)

each channel that the user has joined will have a specific record
for it, with the channel-specific flags and possibly an info
line. the channel-specific flags are:
m master (user is a master for the channel)
n owner (user is an owner for the channel)
o op (bot will give this user chanop)
d deop (bot will not allow this user to become a chanop)
f friend (user is not punished for doing bad things)
k kick (user is auto-kicked)
v global voice (user get +v automatically on +autovoice channels)
q global quiet (user never gets +v on +autovoice channels)
a global auto-op (always op this user on join)
(plus 26 user-defined flags, A-Z)

Here is an example that show you how to add a bot global op and also give the user +n (owner) at #Israel:

.+user ^TCG^ ^TCG^!*@*.co.il
.chattr ^TCG^ +o
.chattr ^TCG^ +n #Israel

After this, you need the user to set a password. He does this by messaging the bot with 'PASS passeord' (Without the ').
/msg Bot pass blabla

Thats it.... you added him!
Now... If you would like to remove him you need to type: .-user <handle> and it will delete him.

--[ Channels stuff ]--

This section is related to channel matters.
To join a bot into a channel you type in the DCC chat to him:
.+chan #Channel
That will make him join #Channel
.-chan #Channel

To set someone as a channel owner do: .chattr NickName +n #Channel
If you would like to gather some info on a channel type:
.chaninfo #Channel
To set various channel options, like maximum messages per second or maximum deops per second.
To set something type: .chanset #Channel setting value
Available settings:
flood-chan (number:seconds)
how many channel messages in hom many seconds is a flood
not specifying or using number = 0 will not check chan floods!
flood-ctcp (number:seconds)
how many channel messages in hom many seconds is a flood
not specifying or using number = 0 will not check ctcp floods!
flood-deop (number:seconds)
how many deops in how many seconds is a mass de-op
not specifying or using number = 0 will not check de-op floods!
flood-kick (number:seconds)
how many kicks in how many seconds is a mass kick?
not specifying or using number = 0 will not check mass kicks!
flood-join (number:seconds)
how many joins/nick changes in how many seconds is a join flood?
not specifying or using number = 0 will not check join floods!

The value format is usually how much time:how many seconds.
For example, if you would like to kick anyone that deop 3 users in 10 seconds in #Channel you will do:
.chanset #Channel flood-deop 3:10
You can also set channel options by doing .chanset #Channel +/-option
Available options:

clearbans
clear all channel bans when the bot joins? (ie, force the channel's
ban list to match the bot's internal list)
enforcebans
when a ban is set, kick people who are on the channel and match the
new ban? (ie, they were on the channel before the ban)
dynamicbans
only activate bans on the channel when necessary? (this keeps the
channel's ban list from getting excessively long. the bot still remem-
bers every ban, but it only activates a ban on the channel when it sees
someone join who matches that ban.)
userbans
allow bans to be made by users directly? (if turned off, the bot will
require all bans to be made through the bot's console)
autoop
op users with the +o (op) flag as soon as they join the channel?
(hint: this is a BAD IDEA)
bitch
only let users with +o (op) flag be channel ops?
greet
say a user's info line when they join the channel?
protectops
re-op a user with the +o (op) flag if they get deopped?
statuslog
log the channel status line every 5 minutes? (some people think
it's annoying)
stopnethack
de-op someone that enters the channel with server ops (ie, netsplit
ops) when they didn't have them before the split?
revenge
remember people who deop/kick/ban the bot or valid ops, and punish them?
users with +f (friend) flag are exempt from revenge
autovoice
voice users with +v (voice) flag when they join the channel?
secret
prevent this channel from being listed on the botnet? (for paranoid
people)
shared
share user channel info for this channel?
cycle
cycle the channel when it becomes op-less?
dontkickops
do you want the bot not to be able to kick +o flag users ?
letting them kick-flood for instance, to protect the channel agaisnt
clone attacks
seen
respond to seen requests in the channel? (seen module must be loaded)

For example: .chanset #Channel +autoop +autovoice

--[ Linking up bots ]--

Bots can be connected together, to allow users on all the linked bots to chat in one large partyline.
Here is how you link them up:

First, you need to know their hosts and ports.
To get the hosts, you /whois the bot while he is on IRC.
To get the telnet port, you type in the bot .dccstat
(Note: Every bot must have a diffrent host / port)

Here is an example of what you get after typing .dccstat:
SOCK ADDR PORT NICK HOST TYPE
---- -------- ----- -------- ---------------- ----
3 C7CB1589 2000 (telnet) * lstn
5 00000000 6667 (server) er.irc.israel.net serv (lag: 0)
7 C0725278 1469 ^TCG^ tadmin.israel.net chat flags: cPtEp/0

The port is the port that is near the nick (telnet). The port 2000.

II. TERMS USED

The following are some common terms used in this document.
If applicable, there is also the associated command named.


Botnet
The term used to describe multiple bots connected together.


Link
The term that means the actual linking of one bot

commands: ".link <botname>" ".unlink <botname>"


Hub
A bot is described as a hub-bot, if one or more leafs are linking
to him.


Leaf
A leaf is a bot connecting to an other bot.


Share
The term used to describe two bots sharing user records.


Aggressive Share
Term used to describe the method of sharing user-files. Aggressive
share bots will send user data to another bot.


Passive Share
Term used to describe the method of sharing user-files. Passive
share bots will only receive users from an other bot.


Flags
Flags are attributes that determine what a bot can or is allowed
to do. Flags can be either global (+s) or channel specific (|+s #lamest).
Botnet affecting flags are:

s share (user records will be shared aggressively with this bot)
p share (user records will be shared passively with this bot)
g global share (share all channels)
h hub (bot is auto-linked)
a alternate (bot is auto-linked if the hub bot can't be linked)
l leaf (bot is not allowed to link in other bots)
r reject (bot will not be allowed on the net)
i isolate (isolate the party line across a botlink)
0-9 user (user defined flags)

command: ".botattr <botname> [(.+<flag> [#channel]) or (.-<flag> [#channel])]"


Address
The physical address, containing the host and port address of the bot.
i.e. lame.org:3333

command: ".chaddr <botname> <hostaddress:botport[/userport]>"


Relay
The relay port number of the bot if defined in the config file.
Note that you can define one for telnet connections to other bots
and one for relay connections.


Relay connection
A relay connection is used to relay (jump) to another bot in DCC chat.
You can still relay to another bot even if this is not defined in the
conf file.

command: ".relay <botname>"


Port
The telnet port is used by the bot to communicate with other bots and/or
users. Note that you can define two separate ports for user and bot
connections.




III. WHAT IS A BOTNET FOR?

Basically a botnet is needed if you want to use more then one bot to protect
your channel.
Linked Bots can share user records (global or channel specific) between each
other or perform script controlled tasks. Such a script can be get-ops (ops each
bot in a botnet) or some kind of a prevent-flood stuff. Just take a look at /pub/eggdrop/scripts1.3 on ftp.eggheads.org and you'll find a lot of botnet
scripts.




IV. ADDING AND LINKING BOTS

With the common terms out of the way we can start with the process of
linking two bots. Before you start you have to know the following:

- What are the domains and ports of the bots.

Let's say there is BotA on lame.org listening to port 3333 and BotB
on irc.org listening to port 4444. Now you have to add each Bot to the
other's userfile (including hostmask, address and listening port of the
other bot). In BotA's console you have to type ".+bot BotB irc.org:4444"
(assuming that BotB is in the channel and so the hostmask is grabbed
automatically, otherwise you have to add it manually with ".+host") and on
BotB's console ".+bot BotA lame.org:3333".
At this point you can link them for the first time manually by typing
".link BotA" on BotB's console (or in reverse, of course with BotB ".link BotB"
on BotA's console). The bots will give themselves now randomized passwords,
which are *not* stored encrypted in the userfile. Now you've generated your
first botnet.
Note that you can add and link as much Bots as you want to your botnet.




V USING BOTFLAGS

Botflags are needed to assign special functions and tasks to your bots.

"h" (hub)
If you want your bots to auto-link after getting unlinked or started (due
to a crash or a server reboot) or started, you have to set +h on the bot
you want to link to an other.
Note, you can assign +h only to one bot at a time!

command: ".botattr <botname> +h"


"a" (alternate)
If your leaf's are for some reason not able to link to your hub, they will
start to connect to an other "alternate-hub", which you can define by
setting "+a" on one bot.
Note, you can assign +a only to one bot at a time!

command: ".botattr <botname> +a"


"l" flag (leaf)
This flag assigned to another bot will cause your bot to unlink the other
one, if it tries to link any other bot.

command: ".botattr <botname> +l"


"r" flag (reject)
If you assign this flag to a bot, it won't be tolerated on your botnet and
will be unlinked, if it tries to link to your one or any other bot.

command: ".botattr <botname> +r"


"i" flag (isolate)
Setting this flag to a bot will effect an isolation of the partyline
between your bot(net) and the other bot(net).

command: ".botattr <botname> +i"


"0-9" flag (user)
These 10 flags aren't hardcoded into eggdrop and can be assigned by scripts
or just for fun :-)

command: ".botattr <botname> +(0-9)"


"s" flag (share aggressively)
+s If you set on BotA's console BotB +s then BotA will try to send his
userfile (parts selected by |s and g flags) aggressively to BotB.

command: ".botattr <botname> +s"


|s With this flag you can define channels, which you want your bots
to share.
Note that you can use this flag only on +s bots!

command: ".botattr <botname> |s #lamest"

|+s You can assign the channel for which the bot will acceppt changes to
his userfile from a +p set bot.

command: ".botattr <botname> |+s #lamest"


"p" flag (share passively)
If you set this flag to another bot, your bot will accept changes to his
userfile by the other one (as much as you've allowed with |+s or +g)

command: ".botattr <botname> +p"


"g" flag (global share)
If you set this flag on your +s or +p bot, |s and |+s are getting obsolete.
Every ban and every user on every single channel will be transfered/accepted.

command: ".botattr <botname> +g"




VI MAKE TWO BOTS SHARE USER RECORDS

Before you start preparing your bots for sharing, you have to make sure that
you've loaded the transfer, share and filesys module into your bot (look
through the conf). You also have to ensure that the channel, which user records
should be shared, is set +shared in the conf.

If you've fulfilled all the requirements mentioned above, you can start to
prepare your bots.
At first you have to decide which bot should share aggressively (BotA) and which
will be passively (BotB) receive the user records. You should type this on your
bots console (Note that you can't change botflags for a linked bot, you have to
unlink it first):

On BotA:
.botattr BotB +s

On BotB:
.botattr BotA +p

Next you have to decide if BotA should share every channel with BotB or if just
one specific. If you want him to share the user record globally you have to type
the following:

On BotA:
.botattr BotA +g

On BotB:
.botattr BotA +g

If you don't want to share all channels with BotB but #lamest you have to set
the following:

On BotA:
.botattr BotA |s #lamest

On BotB:
.botattr BotA |+s #lamest

You can add as many channels in this way as you like.
Note that by sharing user records, you also share automatically bans and
ignores (globally or channel specific) with the other bot. Botflags are
*not* shared.

Note: Taken from eggdrop1.3.28 documents.

--[ What is the TCL and what does have have to do with EggDrop? ]--

TCL is a programming language that is used to write scripts for EggDrop.
This subject is so big I can write a whole tutorial about it, so instead I'll just write the basics.

To load a TCL script you must add this line to the end of your config file:
source filename.tcl

You can get TCL scripts from: http://www.egghelp.org, bseen.tclslave.net and xcalibre.net

Those scripts can add more function to eggdrops, like kicking on advertising and suck stuff.

--[ Tips and Tricks ]--

Taken from the Eggdrop1.3.28 documents.

Some little tricks that you may or may not know about...

* You can "lock" a user's info line by putting a '@' as the first letter.
They won't be able to change it any more.

* '.status all' will dump out virtually everything you have configured on
your bot

* TCL has a command 'info body <proc>' that will list the contents of a
proc. 'info args <proc>' shows what you have defined as the parameters
for the proc.

* You can rename a builtin command by binding over it. To rename '.status'
to '.report', you'd do:
unbind dcc - status *dcc:status
bind dcc m report *dcc:status
The first line removes the builtin binding on '.status', and the second
line binds '.report' to the builtin status function. Other built-in command
examples include:
unbind msg - status *msg:status
bind msg m report *msg:status
and:
unbind fil - share *fil:share
bind fil m link *fil:share

* You can unlink all bots and clear out the botnet info from memory by
using '.unlink *'. It erases all channel assoc's and everything.

* You can automagically make a ban sticky by adding a * as the first
character in the ban reason.

* You can add a user with a static hostmask when using .adduser by prefixing
their nick by !.
ie with a hostmask of drummer!ident@some.host.com
.adduser drummer
uses *!ident@*.host.com
.adduser !drummer
uses *!ident@some.host.com

--[ Bibliography ]--
Eggdrop1.3.28 Documents
Personal knowledge

[===================================================================================]
[ The EggDrop IRC Bot / Written by The Cyber God (e-mail: talrun@actcom.co.il) ]
[ Version 1.0 / My ICQ#: 7864557 ]
[===================================================================================]
--The Devil is in the Details--
User avatar
weazy
Ex-Admin
 
Posts: 1688
Joined: Sun Jul 07, 2002 10:02 am
Website: http://www.hackerthreads.org
Location: any given

Return to ā€œ%sā€ Security Tutorials

Who is online

Users browsing this forum: No registered users and 1 guest

cron