It's easy to change your subnet mask on Windows. Sometimes it's needed and there weren't any decent guides online, so I thought I'd share this bit of knowledge with those that need it.
Well, first of all: you want to open your Network Connections.
Press Start >> Connect To >> Show All Connections
After that, right click your current connection (in my case, the Local Area Connection) and select Properties.
That, as you may have guessed, will bring up the Properties dialog for the selected connection. (Surprise!) From there -- brace yourself -- you must click on the Properties button. Yes, properties of properties [of properties of properties of properties, etc]
Time for the complex stuff. You remember that button you just clicked? Yeah, the "Properties" button? It's going to open up a properties dialog. Still with me? Let's roll. From here, click the bubble that says "Use the following IP address." That will let you set your own internal IP, subnet mask, and gateway. This is called static. When you let the router hand these out to you without you decided what they are, they are dynamic. And now you know the difference between an internal, static IP and an internal, dynamic IP.
You might need to enter in the extra values (IP and Gateway) if you are changing your subnet mask. If you don't know them, you can open up a console (Start >> Run >> "cmd" >> OK) and type ipconfig. It will tell you your current values for those properties.
P.S. This is also posted on my blog here.
How to Change Your Subnet Mask/Internal IP/Gateway/DNS
- Aiden
- Administrator
- Posts: 1080
- Joined: Tue Oct 31, 2006 11:11 pm
- Location: /usr/bin/perl
-
- n00b
- Posts: 1
- Joined: Wed Jun 30, 2010 5:30 am
hi dear
i want to know to change my ip address through dos cammand pls show me
- Cool_Fire
- Not a sandwich
- Posts: 1913
- Joined: Fri May 09, 2003 1:20 pm
- Location: 41 6d 73 74 65 72 64 61 6d
- Contact:
Re: How to Change Your Subnet Mask/Internal IP/Gateway/DNS
It might be useful to note that this method only works when you have a static network configuration.
Also, the subnet mask is not something you'd generally want to change.
Anyway, in the case of an automatically assigned IP address by a DHCP server, you can open up a command promt. (Windows button+R -> Type cmd -> Click OK)
And type ipconfig /release
followed by ipconfig /renew
This will tell the DHCP server you want to give up your current IP address and then request a new one.
Note this will in only change the IP of the machine you're on, so if you're on a LAN network and not directly connected to the internet, you still won't be able to evade bans and things like that.
Also, the subnet mask is not something you'd generally want to change.
Anyway, in the case of an automatically assigned IP address by a DHCP server, you can open up a command promt. (Windows button+R -> Type cmd -> Click OK)
And type ipconfig /release
followed by ipconfig /renew
This will tell the DHCP server you want to give up your current IP address and then request a new one.
Note this will in only change the IP of the machine you're on, so if you're on a LAN network and not directly connected to the internet, you still won't be able to evade bans and things like that.